FREE SHIPPING on orders over $100 shipped to the US!  Check out our discounts on the home page!

  • Login
Search

Printer Settings

Disclaimer: Please use these settings as a guide only. Unfortunately, not all 3D printers are created equal! It is common to have the same make and model 3D printer that uses different layer durations to achieve the same result. This is usually down to the disappointing quality control from some of the printer manufacturers.

ANYCUBIC PHOTON

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (millimeters)
0.05mm
0.05mm
0.05mm
0.05mm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
100s
100s
60s
45s
NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal layers
0.05mm
0.05mm
0.05mm
0.05mm
Cure time of Normal layers (seconds)
10-12s
10-12s
15-17s
8-10s

ANYCUBIC PHOTON S

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (millimeters)
0.05mm
0.05mm
0.05mm
0.05mm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
40s
40s
40s
40s
NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal layers
0.05mm
0.05mm
0.05mm
0.05mm
Cure time of Normal layers (seconds)
6-8s
6-8s
8-12s
6-7s

CREALITY 3D LD-001 & CREALITY LD-002R

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60s
60s
60s
45s
NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Cure time of Normal Layers (seconds)
6s
6s
8s
5s
Lift Height (mm)
5mm
5mm
5mm
5mm

ELEGOO MARS

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (millimeters)
0.05mm
0.05mm
0.05mm
0.05mm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60s
60s
60s
60s
NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (millimeters)
0.05mm
0.05mm
0.05mm
0.05mm
Cure time of Normal Layers (seconds)
8s
8s
12-15s
6-7s

EPAX

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60s
60s
60s
NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
8s
8s
14s
6-7s

MOONRAY

STANDARD RESIN
Monocure Standard formula works very well in the MoonRay. Just use the settings in the printer as you would with the proprietary resin. 

PEOPOLY MOAI

STANDARD RESIN
Reduce laser power output to 53mw

PEOPOLY PHENOM

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID BIGVAT
Height of Base Layers (microns)
50µm
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
4
Cure time of Base Layers (seconds)  
100
100
100
100
60

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID BIGVAT
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
50µm
Cure time of Normal layers (seconds)
8s
8s
12-15s
6-7s
8s
Lift (millimeters)
6mm
6mm
6mm
6mm
8mm
Wait after print (seconds)
1s
1s
1s
1s
0s

PHROZEN SHUFFLE XL & TRANSFORM

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID BIGVAT
Height of Base Layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60
60
60
60

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID BIGVAT
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal layers (seconds)
7-10s
7-10s
12-15s
7-8s
Lift (millimeters)
4mm
4mm
4mm
4mm
Wait after print (seconds)
1s
1s
1s
0s

PHROZEN SONIC MINI

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base Layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
30
30
30
25

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal layers (seconds)
2.2s
2.2s
4.2 - 6.4s
1.8s

PRUSA SL1

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
45s
45s
45s
45s

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
7.5s
7.5s
7.5s
6.5s

UNIZ SLASH (RAPID RESIN)

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
25s
25s
25s
25s

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
15s
15s
20s
12s
LED Power output (watts)
100W
100W
100W
100W
Cooling time (Seconds)
2s
2s
2s
2s

UNIZ SLASH (STANDARD RESIN)

BASE LAYERS STANDARD RESIN DENTAL STANDARD FLEX100 STANDARD
Height of Base layers (microns)
50µm
50µm
50µm
Number of Base Layers
4
4
4
Cure time of Base Layers (seconds)  
45s
45s
45s

NORMAL LAYERS STANDARD RESIN DENTAL STANDARD FLEX100 STANDARD
Height of Normal Layers (microns)
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
6s
6s
8-10s
LED Power output (watts)
250W
250W
250W
Cooling time (Seconds)
2s
2s
2s

UNIZ SLASH PLUS

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Burn In layers
0.05mm
0.05mm
0.05mm
0.05mm
Exposure time
20secs
20secs
20secs
20secs
Cool down time
Auto
Auto
Auto
Auto
Shrink
0.00mm
0.00mm
0.00mm
0.00mm
Motor Speed
Low
Low
Low
Low
Rise height
Auto
Auto
Auto
Auto
LED Power
300
300
300
300
Infill
100
100
100
100

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Thickness
0.05mm
0.05mm
0.05mm
0.05mm
Exposure time
4.5secs
4.5secs
6-9secs
3.5secs
Cool down time
Auto
Auto
Auto
Auto
Shrink
0.00mm
0.00mm
0.00mm
0.00mm
Motor Speed
Auto
Auto
Auto
Auto
Rise height
Auto
Auto
Auto
Auto
LED Power
300
300
300
300
Infill
100
100
100
100

WANHAO DUPLICATOR 7 & 8

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base Layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60
60
60
60

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
8s
8s
12-15s
6-7s

WOW SPARKMAKER + FHD

BASE LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Base layers (microns)
50µm
50µm
50µm
50µm
Number of Base Layers
4
4
4
4
Cure time of Base Layers (seconds)  
60s
60s
60s
60s

NORMAL LAYERS RAPID MODEL RESIN DENTAL RAPID FLEX100 RAPID TUFF™ RAPID
Height of Normal Layers (microns)
50µm
50µm
50µm
50µm
Cure time of Normal Layers (seconds)
10s
10s
15-17s
8s
Brightness
255
255
255
255

Search

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods